mapping

You’re in the right place for mapping.By now you already know that, whatever you are looking for, you’re sure to find it on FOXTECH ROBOT.we guarantee that it’s here on FOXTECH ROBOT.
The design of FOXTECHROBOT is meticulous. It focuses on functional features such as rainwater leakage prevention, plus the consideration of light mapping, air penetration, heat insulation, and sound insulation. .
We aim to provide the highest quality mapping.for our long-term customers and we will actively cooperate with our customers to offer effective solutions and cost benefits.
  • Slam 100| Handheld Mobile Lidar Scanner Workshop Transformation Display
    Slam 100| Handheld Mobile Lidar Scanner Workshop Transformation Display
    SLAM(Simultaneous Localization and Mapping) is an innovative technology that has revolutionized the way we capture and analyze spatial data. This handheld device is equipped with a lidar scanner, which stands for Light Detection and Ranging. It uses laser beams to measure distances and create detailed 3D maps of the surrounding environment.The workshop transformation display showcases the capabilities of the Slam100 Handheld Mobile Lidar scanner and how it can be used in various industries. The display is divided into different sections, each highlighting a specific application of the technology.
  • SLAM100 Reproduces A Forest Farm|Drawn 3D Model According To Point Cloud Technology
    SLAM100 Reproduces A Forest Farm|Drawn 3D Model According To Point Cloud Technology
    Slam100 can reproduce a forest farm base in a real scene. The forest base is right on the edge of the no-fly zone and cannot use drones for aerial modeling. So Slam100 came in handy. From the video, we can see the upper part is the 3D point cloud real scene effect and the lower part is the 3D model drawn based on the point cloud. The 3D scene display effect after reverse modeling based on the SLAM point cloud data. You can carry out follow-up planning and construction, sunshine analysis, and other work on this model.
  • Japan Construction Measurement Exhibition and Chengdu International Hydropower Innovation
    Japan Construction Measurement Exhibition and Chengdu International Hydropower Innovation
    From May 24th to May 26th, the 4th Japan Construction Measurement Productivity Improvement Exhibition (CSPI EXPO) was grandly held at the Makuhari International Convention and Exhibition Center in Tokyo, Japan. The D2000S multi-rotor drone system and SLAM100 handheld lidar scanner have been shown. The instrument, D-LiDAR2100 lidar, S-RTK100 multi-functional portable RTK module, and S-PACK100 lidar backpack platform made a wonderful appearance at the Tokyo venue. This is also the second time that we follows the North American Geographic Information Week GEO WEEK in Denver, USA in February 2023. Go abroad and display and communicate with overseas users.
  • SLAM2000 Project Mapping&Surveying New Trends
    SLAM2000 Project Mapping&Surveying New Trends
    SLAM2000 is another industry -grade laser scanner innovatively developed by Foxtech Robot. This device uses a hemispherical non -heavy -modularly scanning laser sensor, combined with rotating gimbal platforms to achieve 720 ° without dead angle cloud coverage; new visual camera can be added to introduce visual SLAM algorithms, which can effectively enhance the three-dimensional reconstruction adaptability of weak structural features; Foxtech Robot industry -grade SLAM algorithm, truly realizes super free scene adaptation and high -precision sweeping and fast construction, providing efficient and accurate solutions for 3D mobile measurement requirements.
  • Self-Developed and Upgraded, Newly Released | D-OP5000 Tilt Photography Module
    Self-Developed and Upgraded, Newly Released | D-OP5000 Tilt Photography Module
    D-OP5000 is a five-lens tilt photography module with a 126-megapixel APS-C format independently developed by Foxtech Robot. Compared with the previous generation product, the performance of D-OP5000 has been fully upgraded, with more outstanding imaging quality, more efficient and faster internal and external processing efficiency, and combined with the Foxtech Robot intelligent flight platform, the oblique photography application experience has been fully upgraded.
  • Newly Launched-Lidar Module D-LiDAR2110&2210
    Newly Launched-Lidar Module D-LiDAR2110&2210
    D-LiDAR2110&2210 is another series of miniature airborne lidar payloads developed by Foxtech Robot based on its own MTC technology. This series of equipment continues the design concept of Foxtech Robot's micro-airborne lidar payload. It uses limited hardware and high-precision algorithms to create a highly reliable and low-cost engineering tool to provide customers with high-precision and high-quality surveying and mapping results. 
  • Notes on Aerial Survey Operations of V10 Equipped with DV-LiDAR10 in Zuogong Canyon Area, Tibet
    Notes on Aerial Survey Operations of V10 Equipped with DV-LiDAR10 in Zuogong Canyon Area, Tibet
    The southwest mountainous area has high mountains deep valleys, and rapid rivers. The abundant water volume and huge drop have formed extremely rich water resources. National hydropower construction is blooming all over the southwest. The representatives Baihetan and Wudongde are on the Three Gorges level in terms of installed capacity and water storage scale.The survey area for this trip is located on both sides of a certain river in Tibet. Hundreds of millions of years of water cutting have carved a deep ravine on the towering Qinghai-Tibet Plateau. From the highest snow-capped mountains nearby to the bottom of the valley where the river flows, there is a vertical drop of two More than a thousand meters, the horizontal distance is only six or seven kilometers. The difficulty of flying in such steep terrain is evident. The task of the survey area is to complete the terrain and feature survey in the early stage of construction of a hydropower station in Tibet. The survey area is a valley area with a length of 32km and a width ranging from 1km to 5km. The altitude is between 3300m and 4000m. The rapid changes in weather have increased the difficulty of aerial survey operations.
  • New Product Release | DV-LiDAR600 New Generation Medium-Range Lidar Payload
    New Product Release | DV-LiDAR600 New Generation Medium-Range Lidar Payload
    Currently, there are two main types of UAV airborne lidar. One is a short-range laser of about 250m, which is low-cost, short-range, and suitable for small-scale terrain data acquisition. The other is a long-range laser of 1500m and above, which is heavy. Large, high cost, suitable for large-scale terrain data acquisition for large models. The successful development of DV-LiDAR600 has filled the gap in lightweight medium-range lidar. The device has a total weight of 2345g and a maximum range of 1000m. It can be mounted on the V10/D20/D500 intelligent drone system for efficient operations. DV-LiDAR600 integrates a full-frame camera module and uses a 28mm focal length aspherical lens to acquire orthophoto data with appropriate resolution while collecting laser data.
  • SLAM100 Product Analysis and Underground Space Information Solutions
    SLAM100 Product Analysis and Underground Space Information Solutions
    With the rapid development of urban construction in our country, urban underground space informatization is increasingly valued by industry managers - underground space data is an indispensable and important part of urban construction, realizing three-dimensional informatization of underground space and building a three-dimensional city , providing scientific and technological support for the rational development of urban underground space resources, has become one of the most effective measures to solve urban problems. Therefore, studying high-efficiency, high-precision, and all-factor three-dimensional information acquisition and expression methods in underground space plays a crucial role in promoting urban construction and improving the level of urban informatization.
  • DV-LiDAR10 - A New Innovation in Domestic Long-Distance Lasers
    DV-LiDAR10 - A New Innovation in Domestic Long-Distance Lasers
    DV-LiDAR10 uses domestic long-range surveying and mapping grade lasers with independent intellectual property rights, integrates a 42-megapixel full-frame camera and Foxtech Robot’s self-developed high-precision POS system, and can be mounted on the Pegasus D20 hexacopter platform and V10 vertical take-off and landing Fixed wing platform. Combined with the point cloud one-stop solution of Foxtech Robot's "UAV Manager (Surveying Edition)", customers can enjoy a set of aerial survey solutions with high efficiency, high precision, high reliability and low maintenance cost.
  • Exploring New Fields - Foxtech Robot Focuses on Building a Cheese Service Platform
    Exploring New Fields - Foxtech Robot Focuses on Building a Cheese Service Platform
    The Cheese Division is a division established by Foxtech Robot for the general surveying and mapping industry focusing on aerial surveying, remote sensing and customized R&D services. It provides industry users with services such as UAV flight, data processing, airspace consulting and system customization. Its subsidiary Cheese Network is a professional space remote-sensing public service platform. Based on the capabilities and advantages of Foxtech Robot, Cheese Network aims to build an open, shared, and guaranteed resource-based service platform. Focus on the space remote sensing business and pan-industry customers on both supply and demand sides, create a high-quality industrial integration ecosystem, promote the business extension of partner industry customers and the upgrade of Internet service models, and jointly continue to create and maximize the value of products and data.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Chat with Us

Send your inquiry

Choose a different language
English
Türkçe
हिन्दी
русский
Português
한국어
日本語
italiano
français
Español
Deutsch
العربية
Current language:English