EaseDip V400 Smart Water Sampling System for DJI Matrice 400 Drones

The EaseDip V400 Smart Water Sampling System is a lightweight UAV water sampling payload designed for DJI Matrice 400 drones. With a 620 g main body, 2L sampling bottle, and one-key automatic depth sampling, it helps users complete water collection tasks more efficiently.

The system is suitable for UAV-based remote water sampling, water quality monitoring, environmental inspection, and scientific research sampling tasks.

IDEAL FOR

- UAV Remote Water Sampling

- Water Quality Monitoring

- Environmental Inspection

- Scientific Research Sampling

- DJI Matrice 400 Drone Users

- Automated Depth-Based Sampling

EaseDip V400 supports both automatic and manual water sampling. Operators can set the sampling depth and monitor key information such as bottle speed, released cable length, water surface height, and current / target depth through the remote controller interface.

The system integrates a millimeter-wave radar with 0.001 m resolution to detect the distance between the drone and the water surface in real time. It also includes multiple protection functions such as ground protection, emergency detachment, power-off brake, upper limit protection, and automatic speed control.

NOTE

- A pair of 40 cm extended landing gear is required for the EaseDip V400 Smart Water Sampling System.

 - For any version of the EaseDip V400 water sampler, do not let it touch the ground during ground tests — this can cause the rope to get tangled in reverse. We recommend doing all tests in real water conditions whenever possible. Even in water, don't let the sampler touch the bottom, as this can also cause reverse tangling.

It is recommended to send the lift command after the sampler is filled with water. If reverse tangling happens, send a stop command immediately.

KEY FEATURES

-DJI Matrice 400 Drone Compatibility:

Designed for DJI Matrice 400 drones, suitable for UAV-based smart water sampling tasks.

-620 g Lightweight Main Body:

The compact 221 × 96 × 90 mm main body weighs about 620 g, helping reduce payload burden during flight.

-One-Key Automatic Depth Sampling:

After the drone reaches the target point, users can set the depth and start automatic water sampling.

-Manual Sampling Mode:

Allows users to manually control bottle lowering and lifting for flexible on-site operation.

-0.001 m Millimeter-Wave Radar:

Detects the drone-to-water distance in real time to support safer sampling operations.

-Multiple Safety Protections:

Supports ground protection, emergency detachment, power-off brake, upper limit protection, and automatic speed control.

YOUR PURCHASE INCLUDES

1x EaseDip V400 Smart Water Sampling System for DJI Matrice 400 Drones

2× 40cm long landing gear