Blog

DV-LiDAR10 uses domestic long-range surveying and mapping grade lasers with independent intellectual property rights, integrates a 42-megapixel full-frame camera and Foxtech Robot’s self-developed high-precision POS system, and can be mounted on the Pegasus D20 hexacopter platform and V10 vertical take-off and landing Fixed wing platform. Combined with the point cloud one-stop solution of Foxtech Robot's "UAV Manager (Surveying Edition)", customers can enjoy a set of aerial survey solutions with high efficiency, high precision, high reliability and low maintenance cost.

With the rapid development of urban construction in our country, urban underground space informatization is increasingly valued by industry managers - underground space data is an indispensable and important part of urban construction, realizing three-dimensional informatization of underground space and building a three-dimensional city , providing scientific and technological support for the rational development of urban underground space resources, has become one of the most effective measures to solve urban problems. Therefore, studying high-efficiency, high-precision, and all-factor three-dimensional information acquisition and expression methods in underground space plays a crucial role in promoting urban construction and improving the level of urban informatization.

As the basis and premise of engineering construction, cubic volume calculation plays an important role in the construction of railways, highways, hydropower projects, ports, urban planning and other projects. Accurate calculation of yard quantities plays an important role in resource allocation, project cost estimation, accelerating project progress and It is of great significance to improve the quality of projects. Traditional square measurement methods are mainly based on single-point measurement methods such as total stations and GNSS-RTK. This method is not only time-consuming and labor-intensive, but also has large errors between the calculation results and the actual situation. With the promotion and popularization of 3D laser scanning technology, 3D point cloud data acquisition methods have shown a trend of rapid and diversified development. Its characteristics of rapid and efficient acquisition of high-density and high-precision point cloud data on the surface of accumulations provide a basis for accurate calculation of cubic quantities. new ways.

Currently, there are two main types of UAV airborne lidar. One is a short-range laser of about 250m, which is low-cost, short-range, and suitable for small-scale terrain data acquisition. The other is a long-range laser of 1500m and above, which is heavy. Large, high cost, suitable for large-scale terrain data acquisition for large models. The successful development of DV-LiDAR600 has filled the gap in lightweight medium-range lidar. The device has a total weight of 2345g and a maximum range of 1000m. It can be mounted on the V10/D20/D500 intelligent drone system for efficient operations. DV-LiDAR600 integrates a full-frame camera module and uses a 28mm focal length aspherical lens to acquire orthophoto data with appropriate resolution while collecting laser data.

With the vigorous development of the digital economy, technical exchange activities have been carried out in many places recently to discuss issues related to the integration and application of the digital economy and surveying and mapping geographic information technology. On June 30, Foxtech Robot was invited by the organizer to attend the Yangtze River Delta Surveying and Mapping Geographic Information Technology Exchange Conference held in Shanghai and the Real-life 3D Construction Exchange Conference held in Hefei, Anhui Province, sharing and demonstrating the application of Pegasus robots in surveying and mapping technology. Achievements achieved in field exploration and practice.

Currently, there are two main types of UAV airborne lidar. One is a short-range laser of about 250m, which is low-cost, short-range, and suitable for small-scale terrain data acquisition. The other is a long-range laser of 1500m and above, which is heavy. Large, high cost, suitable for large-scale terrain data acquisition for large models.
The successful development of DV-LiDAR600 has filled the gap in lightweight medium-range lidar. The device has a total weight of 2345g and a maximum range of 1000m. It can be mounted on the V10/D20/D500 intelligent drone system for efficient operations. DV-LiDAR600 integrates a full-frame camera module. Using a 28mm focal length aspherical lens can acquire laser data while simultaneously acquiring orthophoto data of high resolution.

The southwest mountainous area has high mountains deep valleys, and rapid rivers. The abundant water volume and huge drop have formed extremely rich water resources. National hydropower construction is blooming all over the southwest. The representatives Baihetan and Wudongde are on the Three Gorges level in terms of installed capacity and water storage scale.


The survey area for this trip is located on both sides of a certain river in Tibet. Hundreds of millions of years of water cutting have carved a deep ravine on the towering Qinghai-Tibet Plateau. From the highest snow-capped mountains nearby to the bottom of the valley where the river flows, there is a vertical drop of two More than a thousand meters, the horizontal distance is only six or seven kilometers. The difficulty of flying in such steep terrain is evident. The task of the survey area is to complete the terrain and feature survey in the early stage of construction of a hydropower station in Tibet. The survey area is a valley area with a length of 32km and a width ranging from 1km to 5km. The altitude is between 3300m and 4000m. The rapid changes in weather have increased the difficulty of aerial survey operations.

Mountain terrain surveying has always been one of the important application scenarios of airborne lidar. When using lidar for mountain surveying, it is necessary to select a radar payload with characteristics such as high accuracy, high point frequency, high penetration, and high echo number. A payload with such performance can ensure that the laser can pass through dense vegetation and obtain more and more accurate mountain ground point cloud data, thereby producing high-precision, high-quality mountain terrain results.

From May 24th to May 26th, the 4th Japan Construction Measurement Productivity Improvement Exhibition (CSPI EXPO) was grandly held at the Makuhari International Convention and Exhibition Center in Tokyo, Japan. The D2000S multi-rotor drone system and SLAM100 handheld lidar scanner have been shown. The instrument, D-LiDAR2100 lidar, S-RTK100 multi-functional portable RTK module, and S-PACK100 lidar backpack platform made a wonderful appearance at the Tokyo venue. This is also the second time that we follows the North American Geographic Information Week GEO WEEK in Denver, USA in February 2023. Go abroad and display and communicate with overseas users.

On November 11, 2021, we announced the SLAM100, our first handheld LiDAR scanner. After nearly 9 months of market testing, SLAM100 has gained a place in the fiercely competitive field of handheld lidar scanner products, and has been widely recognized by the industry, and product awareness has been effectively improved. 
At present, SLAM100 has been widely used in high-precision surveying and mapping, square calculation, forest resources census, underground space informatization, 3D real scene reconstruction and other application directions. Efficient and convenient measurement methods and relatively complete solutions.

Plastic rockery has been widely used in garden landscaping art. Its phantom can be seen in theme parks, scenic spots, amusement parks, eco-tourism areas, etc., which shows its status in the current garden landscape. The plastic stone rockery has a peculiar shape and a beautiful shape, but such characteristics make its appearance uneven and extremely irregular, which makes it difficult for engineers and technicians to calculate its surface area. The commonly used formula calculation method, posting calculation method and barbed wire usage calculation method in the industry estimate its surface area. It is conceivable that the accuracy of the calculation results will be greatly reduced.

In recent years, with the rapid development of my country's civil drone technology and market, the role of drones in the field of emergency rescue has become more prominent, and has been fully applied to pre-disaster hidden danger monitoring and response verification, real-time investigation and emergency response during disasters, Post-disaster loss assessment, repair and reconstruction and other emergency rescue links. UAVs have unique advantages and broad development prospects in the fields of aerial reconnaissance, fire rescue, emergency rescue, and emergency response due to their simple operation, flexible maneuverability, high safety, comprehensive vision, and strong scalability.
The National UAV Emergency Monitoring Cooperation Mechanism for Major Natural Disasters was established in 2010. The goal of this cooperation mechanism is to improve the emergency response speed and capability. Quickly respond to major disaster emergency relief work. This award marks that Foxtech Robot has officially joined the "National Team", long-term assistance to the national emergency management cause, and positive contributions to improving my country's disaster emergency support capabilities.